MODEL 1028
Features
With a compact design, the 2.8-inch face recognition terminal runs on Linux OS and integrates advanced AI facial recognition algorithms.
Scenarios
Ideal for enterprise time and attendance, office access control, and data center entry scenarios, the terminal integrates tamper-proof and evidence alarms to enhance management and security protection.
Safe and stable
Speedy recognition
Wide pose angle acceptance
MQTT&HTTP protocols
Mask detection & recognition
Face anti-Spoofing
Main Features
Size
Specifications
| Model | Model 1028 |
Hardware
| Processor | High performance ARM processor |
| Operating system | Linux Operating system |
| Card Swiping | 13.56MHz band card recognition, support for ISO/IEC 14443 TypeA, support for optional 125KHz ID card recognition function |
| WiFi | 2.4GHz/5GHz WiFi SoC chip with integrated IEEE 802.11a/b/g/n baseband and RF circuits, up to 72.2Mbps downlink rate |
| Ethernet | 100Mbps Ethernet port |
| Screen | 2.8-inch LCD screen |
| Touch Screen | Capacitive touch screen |
Performance
| Recognition Distance | 0.3~1.5 meters |
| Face Recognition Angle | 30 degrees left and right, 30 degrees up and down |
| Recognition time | Less than 0.5 seconds |
| Face capacity | 2000 |
| Storage capacity | 50000 |
Interface
| Power Out | DC12V/1A |
| Network Interface | 1ch 100M Ethernet port |
| WG Interface | 1ch Wiegand interface input/output |
| Door Sensor | 1ch magnetic interface |
| Open Button | 1ch open door interface |
| Relay Interface | 1ch relay interface |
| USB Interface | 1ch USB2.0 interface（Type-C） |
Camera
| Camera | Dual cameras, visible light and near infrared, support liveness detection |
| Effective pixels | 1 million pixels |
| SNR | ≥50db(AGC OFF) |
| Wide Dynamic | 100db，ISP algorithm face partial exposure |
Regular
| Operating Temperature | -10℃~+50℃ |
| Working Humidity | 10%~90% relative humidity, no condensation |
| Power | 10W(MAX) |
| IP Rating | IP42 |
| Power Supply | DC12V/1A |
| Equipment Dimension | 86*86*17（mm） |
Wiring Diagram
